schon geil philipo, so wird das nix! ;) ein weiser mann der buffet!
naja.. die QZ kommen jez glaub am 3.3 raus... dann sind wir alle schlauer...
bin hier nicht investiert... aber halte ne menge A.power aktien, die au gut im minus bei mir sind... teilt da wer dasselbe schicksal wie ich?! ;) ich hoffe ich kann hier paar rückschlüsse auf A.power ziehen wenn die QZ von China Wind Sys rauskommen.
Hallo ja diese Papiere wurden schon Ende januar im Aktionär als eventuelle Outperforming Chance empfohlen.
Aus Sicht der finanziellen Situation des chinesischen Unternehmens und in Anbetracht der massiven Aufstockung des gesamten Energiebedarfs für China kann sich die Aktie mit einem KGV 7-10 derzeit als günstiger Einstieg erweisen.
Das Risiko für diese Papiere dürfte derzeit geringer sein wie für viele sogenannte deutsche Chartcracker.
Auch sollte durch die enorme Anzahl dieser Papiere am Markt und der weltweiten Streuung keine riesigen Kursschwankungen
mit Ausnahme eventl. einzukalkulierenden Währungsveränderungen( Aufwertung Yuan) gerechnet werden.
Ne Garantie gibts nie und dies ist keine Aufforderung zum Erwerb nur meine Meinung nach guten Recherchen.
Hab die Aktie seit 4 Wochen mit nem satten Plus von 25% im Depot.
die aktie mal bei 3,20 eingekauft und schnell mit etwas verlust vekauft. würde bei diesen kursen wenn die fundamental daten weiter hin gut sind unbedingt bei diesen kursen einsteigen. leider gibt es von dieser aktie sehr lange keine informationen bezüglich umsatz und gewinn aussichten.
China Wind Systems Receives Follow-up Orders to Supply Solar Chambers Subassemblies WUXI, Jiangsu, China, April 21, 2011 /PRNewswire-Asia-FirstCall/ -- Â China Wind Systems, Inc. (Nasdaq: CWS), ("China Wind Systems" or the "Company"), a leading supplier of forged products and industrial equipment to the wind power and other industries in China, today announced that the Company received a total of two purchase orders from its customer to deliver 40 solar chamber subassemblies The Company delivered sample product units over the past few months, which have been inspected and approved by the customer. As a result, the Company received a follow-up order to supply 10 units of solar chamber subassemblies for $0.3 million for delivery in April 2011 and another order to supply 30 units for $0.8 million by June 2011.
"We will utilize our self-manufactured forged rolled rings to manufacture and deliver solar chamber subassemblies under the contract. This marks an important milestone for China Wind as it demonstrates the high-quality of our forged rolled rings which are in accordance with the international standards for manufacturing and quality control. Our new customer is assisting us in expanding our capacity by supplying some components for six of the 30 units under the second purchase order," commented Mr. Jianhua Wu, Chairman and Chief Executive Officer of China Wind Systems. "We are committed to the highest quality standards of production which enable us to capitalize on the attractive growth opportunities in the clean energy sector. We believe this supply contract moves us closer to our goal of becoming a leading supplier to the clean energy industry and further diversifying our customer base. We believe clean energy solutions will drive our future revenue growth and profitability."
China Wind Systems, Inc. Reports First Quarter 2011 Results
WUXI, China, May 17, 2011 /PRNewswire-Asia-FirstCall/ -- China Wind Systems, Inc. (NASDAQ: CWS), ("China Wind Systems" or the "Company"), a leading supplier of forged rolled rings and other forged components to the wind power and other industries and industrial equipment primarily to the textile industry in China, today announced its financial results for the three months ended March 31, 2011.
First Quarter 2011 Financial Highlights
Revenue increased 4.3% year-over-year to $17.6 million Revenue from the sale of forged products to the wind power and other industries increased 13.2% year-over-year to $13.4 million, or 76.4% of revenue Revenue from the sale of forged products exclusively to the wind power industry increased 46.5% year-over-year to $10.2 million, or 58.0% of revenue Operating income increased 24.1% year-over-year to $3.6 million Net income increased 36.9% to $2.7 million, or $0.10 per diluted share
"During the first quarter of 2011, sales to the wind power industry increased as we expanded our customer base and delivered large scale orders of forging equipment used in the wind power industry. As a result of our increased focus on the wind power segment, sales of our forging equipment to other industries continued to soften. In addition, the decrease in revenue from the sale of dyeing and finishing equipment reflects the business cycle as well as delays in purchasing new equipment designed to meet stricter environmental standards imposed by the Chinese government as textile manufacturers evaluate both their projected business in uncertain economic times and new equipment designed to meet the new standards. Â Longer-term, we believe the new policies will generate a demand for our next generation dye machine models that were introduced in November 2010, which we believe meets the new standards," commented Mr. Jianhua Wu, Chairman and Chief Executive Officer of China Wind Systems. "During the quarter, we continued our efforts to capitalize on the attractive growth opportunities in the clean energy sector. We recently received two follow-on purchase orders of solar chamber subassemblies worth $1.1 million."
First Quarter 2011 Results
Revenue for the first quarter of 2011 increased 4.3% to $17.6 million, compared to $16.8 million in the same period of 2010. The increase was attributable to the increase in revenue from forged rolled rings and related products segment, partially offset by a decline in revenue from the dyeing and finishing equipment segment. This decline was largely due to the business cycle and customer delays in purchasing new equipment designed to meet the PRC government''s mandatory environmental protection policies, which require companies in the textile industry to use more energy efficient machinery with lower carbon emissions.
Revenue from the sale of forged rolled rings to the wind power industry and other industries grew 13.2% to $13.4 million, or 76.4% of revenue, compared to $11.8 million, or 70.4% of net revenue, in the same period last year.
Revenue from the sale of forged rolled rings exclusively to the wind power industry rose 46.5% to $10.2 million, representing 58.0% of revenue, compared to $7.0 million, or 41.3% of revenues in the comparable period last year. Â
Revenue from the sale of forged rolled rings to other industries decreased 33.9% to $3.2 million, or 18.4% of revenue, compared with $4.9 million for the comparable period of the prior year. Â
Revenue from the Company''s dyeing and finishing equipment segment decreased 16.9% to $4.1 million, or 23.6% of net revenues, compared to $5.0 million, or 29.6% of revenue, for the first quarter of 2010.
Gross profit for the first quarter of 2011 increased 3.1% to $4.6 million, compared to $4.4 million for the same period in 2010. Gross margin slightly decreased to 25.9% during the first quarter of 2011 compared to 26.2% for the same period a year ago. The decline in gross margin was mainly due to an increase in costs of raw materials and labor, which could not be fully passed on to the Company''s customers in a timely manner. Gross margins for the Company''s forged rolled rings and other components and dyeing and finishing equipment were 27.4% and 21.1%, respectively, during the first quarter of 2011.
Operating expenses decreased 38.5% to $0.9 million, compared to $1.5 million in the comparable period last year, as a result of lower selling, general, and administrative expenses related to a bad debt recovery and decreased stock-based compensation.
Operating income increased 24.1% to $3.6 million, compared to $2.9 million for the same period of 2010. Operating margin was 20.7% compared to 17.4% in the first quarter last year.
Net income increased 36.9% to $2.7 million, compared to $1.9 million in the comparable period last year. Basic earnings per share in 2011 and 2010 were $0.14 and $0.11, respectively. Basic earnings per share were calculated using basic weighted average shares of 18,925,959 and 17,252,799 for the three months ended March 31, 2011 and 2010, respectively. Diluted earnings per share were $0.10, compared to $0.08 in the same period of 2010. Diluted earnings per share were calculated using diluted weighted average shares of 25,655,436 and 25,395,026 for the three months ended March 31, 2011 and March 31, 2010, respectively. Â
As of March 31, 2011, China Wind Systems held cash and cash equivalents of $1.3 million, up from $0.9 million at December 31, 2010. Â Accounts receivable were $6.2 million and total current assets of $15.5 million. The Company had $1.2 million in short-term loans payable, no long-term debt and stockholders'' equity stood at $66.0 million. In the three months ended March 31, 2011, the Company generated $3.4 million in cash flow from operations.
The Company''s planned capital expenditures for 2011 mainly relate to purchase of manufacturing equipment for its new solar segment and maintenance expenditures for its forged rolled rings and dying equipment segment. Â The Company plans to finance these expenditures with cash flow from operations.
China Wind Systems delivered sample product units used in the solar power industry over the past few months. Following successful inspection and approval by its customer, the Company received a total of two purchase orders for approximately $1.1 million from its customer to deliver solar chamber subassemblies. The Company will supply these units of solar chamber subassemblies by June 2011.
The Company is currently producing subassemblies for equipment used in the wafer production of multi crystalline silicon products and plans to roll out products used for mono crystalline silicon products over the next few months. The Company expects the market for the mono crystalline silicon products to present a significant growth opportunity in the next 12-18 months time frame. In 2011, the Company plans to purchase new manufacturing equipment to enhance efficiency and ramp up production of its solar segment.
"We are confident that sales of our next generation air dyeing machines, which meet the PRC government''s environmental standards, will continue to grow. In the coming quarters, we expect to see increased sales of our new dye machine models," commented Mr. Wu. "We will continue to focus on the wind energy sector and work with our existing and potential customers to maintain our market position despite the difficult pricing environment. We are also pleased with our co-operation with our first customer in the solar industry and are excited about the growing opportunities in the clean energy sector both domestically and internationally."
China Wind Systems will conduct a conference call at 8:00 a.m. Eastern Time on Tuesday, May 17, 2011 to discuss results for the first quarter and fiscal year 2011.
To participate in the live conference call, please dial the following number five to ten minutes prior to the scheduled conference call time: (866) 759-2078. International callers should dial (706) 643-0585. When prompted, please enter conference passcode: 65642121.
If you are unable to participate in the conference call at this time, a replay will be available for 14 days starting on May 17, 2011 at 11:00 a.m. ET. To access the replay, dial (800) 642-1687. International callers dial (706) 645-9291, and enter passcode: 65642121.
About China Wind Systems, Inc.
China Wind Systems, Inc. is a profitable, rapidly growing supplier of precision forged components primarily to the wind industry in China - the world''s leading wind-power market. The Company also supplies forged and other components and fabricated products to other industries. For more information on the Company, visit http://www.chinawindsystems.com. Information on the Company''s Web site or any other Web site does not constitute a portion of this release.
Safe Harbor Statement
This release contains certain "forward-looking statements" relating to the business of the Company and its subsidiary and affiliated companies. These forward looking statements are often identified by the use of forward-looking terminology such as "believes," "expects" or similar expressions. Such forward looking statements involve known and unknown risks and uncertainties that may cause actual results to be materially different from those described herein as anticipated, believed, estimated or expected. Investors should not place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The Company''s actual results could differ materially from those anticipated in these forward-looking statements as a result of a variety of factors, including those discussed in the Company''s periodic reports that are filed with the Securities and Exchange Commission and available on its website, including factors described in "Risk Factors" and "Management''s Discussion and Analysis of Financial Condition and Results of Operations" in our Form 10-K for the year ended December 31, 2010 and in "Management''s Discussion and Analysis of Financial Condition and Results of Operations" in our Form 10-Q for the quarter ended March 31, 2011. All forward-looking statements attributable to the Company or to persons acting on its behalf are expressly qualified in their entirety by these factors other than as required under the securities laws. The Company does not assume a duty to update these forward-looking statements.