Dieser Explorer kann nur steigen,

der Rigs stimmt, hören wir diese Woche noch einige Ergebnisse. Es müssen jetzt sowohl bei Gold als auch bei Tungsten wieder mal richtig fette Ergebnisse vermeldet werden!
In Vorfreude viena
Ich erwarte diese Ergebnisse jetzt im 3 Wochen Rhythmus.  

Colt Resources intersects 11.96g/t Au over 10.83m, including 31.07g/t Au over 3.40m at its Boa Fé Gold Project, Southern Portugal







Trading Symbols:



GTP - (TSX-V)
P01 - (FRANKFURT)
COLTF - (OTCQX)



 

MONTRÉAL, Feb. 7, 2012 /CNW Telbec/ - Colt Resources Inc. ("Colt" or the "Company") (TSXV: GTP) (FRA: P01) (OTCQX: COLTF) is pleased to announce that it has received final analytical results for four holes from the ongoing drilling campaign on its Boa Fé gold project, located within the Company's 100% owned 47Km2 Boa Fé Experimental Mining License (EML) in southern Portugal. The Boa Fé EML is completely surrounded by the Company's 100% owned (732Km2) Montemor exploration concession.

The results are highlighted as follows:



Drill hole BFCH-11-005 (Inclined -45o to 085) - 175.70m deep



 

From (m)

To (m)

Grade g/t Au

Interval (m)*



 

45.90

75.30

2.60

29.40



(Including)

56.00

66.40

3.86

10.40



Drill hole BFCH-11-006 (Vertical) - 51.89m deep



 

From (m)

To (m)

Grade g/t Au

Interval (m)*



 

44.70

48.40

1.10

3.70



Drill hole BFCH-11-007 (Vertical) - 87.00m deep



 

From (m)

To (m)

Grade g/t Au

Interval (m)*



 

9.65

20.50

11.96

10.85



(Including)

10.60

14.00

31.07

3.40



Drill hole BFCH-12-001 (Vertical) - 55.24m deep



 

From (m)

To (m)

Grade g/t Au

Interval (m)*



 

40.15

45.20

3.30

5.05


* True Width has not been determined at this time.

Nikolas Perrault, President and CEO of Colt, stated, "We are very pleased with these results which add further confidence to our understanding of the geology and mineralization when combined with results from the very extensive database that we acquired as part of the property acquisition."

Program Strategy

Gold mineralization has been identified in several shallow deposits along a shear zone that extends over some 30 Kilometers.  Previous drilling was focussed on the highest grading portions of gold anomalies that closely follow the regional shear.  Minimal drilling has been performed to test depth extensions below an average of 100 metres or along strike between known mineralized deposits.  Given the shear zone style of mineralization and extensive gold anomalies in soils, there is good potential to build upon previous work that supported several non NI 43-101 compliant resource estimates that range from 150koz to 550koz of gold as defined over the period 1991-2008 (see press release March 7, 2011).

Colt's initial work program during the first half of 2012 is designed to confirm and expand upon extensive historical drilling and trenching performed by previous operators.  The company has commenced the implementation of an aggressive advanced stage exploration campaign consisting of a combination of vertical and inclined drill holes positioned to confirm previous drilling results at the Chaminé, Casas Novas and Ligeiro deposits.  Geophysical exploration including resistivity and seismic methods are also being employed. This work will greatly expand the geological, geotechnical and metallurgical knowledge base.  Our geological team is testing the geological models proposed by previous operators so as to move forward with increased confidence towards resource delineation and mine development.  High priority regional targets identified through field prospecting will also be tested. The results of this phase of work will form the basis for an initial NI 43-101 resource estimate to be prepared later in 2012 covering several previously drilled gold bearing deposits within the Boa Fé EML.

Quality Assurance / Quality Control (QA/QC)

Sample intervals are reported as metres (m) down hole and as such do not represent true widths of mineralized intersections. The morphology of the gold mineralization is yet to be determined.

All drill core is transported by Company personnel from drill site to a nearby secure storage facility for logging and sampling. Sampling intervals are defined after core logging and determination of probable high grade zones based on visible mineralisation and favourable structure. One half of the core is sent for analysis, while the other half is retained in the core boxes for future reference.

All samples are sent by courier to ALS Chemex's facility in Seville, Spain, where they undergo sample preparation. The resulting pulps are shipped by ALS to their laboratory in Romania for gold assay and routine ICP multi-element analysis. Gold analysis for all samples is done via method "Au - AA23" (Au by fire assay and AAS, 30g nominal sample weight). The detection limit for this method is 5 ppb. For every sample with Au values over 3 ppm, the pulp is re-analyzed by method "Au - GRA21" (Au by fire assay and gravimetric finish, 30g nominal sample weight). The detection range for this method is 0.05-1000 ppm.

A set of standards and blanks has been inserted by Colt into the sample stream on a regular basis in addition to the laboratory's own internal QA/QC standards and duplicates. QA/QC results to date are well within the accepted norm.  

sondern sehr GUT!

den letzten News sind auch noch 4 Rigs bei Tungsten im Einsatz...
Da wird jetzt stetiger Newsflow kommen. Und 7 neue Mios werden diesen Monat auch noch in die Kassen gespült....Nicht schlecht-Herr Specht!  

Am Freítag laufen die Warrants aus-das sollte der Startschuss für eine leichte Erholung sein. Hoffen wir , daß der Goldkurs mitspielt!  

entwickelt sich sehr positiv.  

Colt Resources intersects 0.41%WO3 over 14.46m, including 0.74% WO3 over 5.88m at its Tabuaço Tungsten Project, Northern Portugal Trading Symbols: GTP - (TSX-V) P01 - (FRANKFURT) COLTF - (OTCQX) MONTREAL, Feb. 22 /PRNewswire/ - Colt Resources Inc. ("Colt" or the "Company") (TSXV: GTP) (FRA: P01) (OTCQX: COLTF) is pleased to announce that it has received final analytical results for 11 holes from its ongoing drilling campaign at its Tabuaço (São Pedro das Aguias) tungsten project, located in the Company's wholly owned Armamar-Meda concession in northern Portugal. These results represent both resource confirmation drilling at the main Tabuaço resource area and regional exploration to test a previously identified zone that is known to outcrop at Quinta das Herédias, approximately 200 metres to the southeast of Tabuaço. In addition, a scout drill hole (DHT-49) recently completed by Colt Resources to test a soil geochemical anomaly at Quinta da Aveleira, approximately 750 metres northwest of the Tabuaço resource area, has intersected previously undiscovered, scheelite mineralized skarn horizons similar to those intersected at Tabuaço. These represent a grey metasomatized main unit and a pink/green banded lower unit in proximity to a granite contact. Although assay results for this new mineralization are still pending, Colt believes that this new discovery may represent an opportunity to significantly increase resources. The collection of bulk samples using large diameter core to allow more detailed metallurgical testwork to improve recoveries and assist in designing optimal processing methods has also commenced. Colt announced the initial NI 43-101 estimate for the Tabuaço deposit in November 2011 (Press Release November 7th, 2011). Nikolas Perrault, President and CEO of Colt, stated, "The discovery of a new zone of mineralization provides a strong indication that the Tabuaço deposit will grow. We are very pleased with this latest development and look forward to being able to release results as soon as possible." These results are part of an ongoing drilling program designed to provide data on the internal grade and structural consistency of the main Tabuaço skarn hosted tungsten deposit and to test extensions and nearby mineralized skarn horizons with similar characteristics to the main deposit. The results are highlighted as follows: Tabuaço main resource area -------------------------------------------------- From (m) To (m) Grade % WO3 Interval (m) True Width (m)* -------------------------------------------------- Drill hole DHT-31 (Inclined -60 degrees to 126 degrees) - 180.20m deep -------------------------------------------------- 121.60 134.60 0.29% 13.00 10.93 -------------------------------------------------- Including 122.60 128.60 0.49% 6.00 5.88 -------------------------------------------------- 139.00 156.20 0.41% 17.20 14.46 -------------------------------------------------- Including 147.75 154.75 0.74% 7.00 5.88 -------------------------------------------------- Drill hole DHT-34 (Inclined -55 degrees to 030 degrees) - 79.85m deep -------------------------------------------------- 30.70 35.10 0.89% 4.40 4.22 -------------------------------------------------- 42.80 47.80 0.55% 5.00 4.80 -------------------------------------------------- Drill hole DHT-36 (Vertical) - 163.35m deep -------------------------------------------------- 65.25 71.25 0.31% 6.00 5.64 -------------------------------------------------- 124.33 131.10 0.52% 6.77 6.36 -------------------------------------------------- Drill hole DHT-37 (Vertical) - 102.60m deep -------------------------------------------------- 79.10 80.10 0.54% 1.00 0.94 -------------------------------------------------- Drill hole DHT-38A (Vertical) - 65.50m deep -------------------------------------------------- 19.95 25.40 0.46% 5.45 5.12 -------------------------------------------------- Drill hole DHT-39A (Inclined -73 degrees to 300 degrees) - 171.00m deep -------------------------------------------------- 125.45 132.90 0.38% 7.45 6.88 -------------------------------------------------- 137.50 140.80 0.42% 3.30 3.05 -------------------------------------------------- Drill hole DHT-40 (Vertical) - 108.35m deep -------------------------------------------------- 84.70 88.05 0.22% 3.35 3.15 -------------------------------------------------- Drill hole DHT-41 (Vertical) - 221.45m deep -------------------------------------------------- 155.00 156.0 0.58% 1.00 0.94 -------------------------------------------------- Drill hole DHT-46 (Vertical) - 61.90m deep -------------------------------------------------- 13.25 16.40 0.73% 3.15 2.96 -------------------------------------------------- 21.40 24.40 0.45% 3.00 2.82 -------------------------------------------------- Quinta das Herédias area -------------------------------------------------- Drill hole DHT-42 (Vertical) - 61.20m deep -------------------------------------------------- 10.45 11.50 0.11% 1.05 0.99 -------------------------------------------------- Drill hole DHT-44 (Vertical) - 68.60m deep -------------------------------------------------- 23.60 25.20 0.24% 1.60 1.51 -------------------------------------------------- * True Width was determined assuming the mineralization has an average strike of 315 degrees and an average dip of-20 degrees. Quality Assurance / Quality Control (QA/QC) Sample intervals are reported as both metres (m) downhole and as true thickness, which have been calculated using cross sectional interpretation of the mineralized intercepts in three dimensions. The actual dip of the skarn controlled mineralization is generally shallow with an average dip of-20 degrees. All drill core is transported by Company personnel from drill site to a nearby secure storage facility for logging and sampling. Sampling intervals are defined after core logging and determination of scheelite content by examination under short-wave UV-light. One half of the core is sent for analysis, while the other half is retained in the core boxes for future reference. Samples are sent by courier to ALS Laboratory Group, Seville, Spain. Samples are analyzed for W and Sn using a metaborate fusion followed by XRF. Assay results for tungsten are reported by the laboratory as W%. WO(3) values are calculated using a conversion factor of 1.2611. A set of standards, duplicates and blanks is inserted by Colt into the sample stream on a regular basis in addition to the laboratory's own internal QA/QC standards and duplicates. QA/QC results to date are well within the accepted norm. About Colt Resources Inc. Colt Resources Inc. is a Canadian junior exploration company engaged in acquiring, exploring, and developing mineral properties with an emphasis on gold and tungsten. It is currently focused on advanced stage exploration projects in Portugal, where it is the largest lease holder of mineral concessions. SRK ES Director - Gareth O'Donovan CEng MSc BA (Hons) FIMMM FGS, is the independent qualified person, as defined in NI 43-101, for Colt's projects in Portugal. Mr. O'Donovan has reviewed the content of this press release, and consents to the information provided in the form and context in which it appears. The Company's shares trade on the TSX-V, symbol: GTP; the Frankfurt Stock Exchange, symbol: P01; and, the OTCQX, symbol: COLTF. FORWARD-LOOKING STATEMENTS: Certain of the information contained in this news release may contain "forward-looking information". Forward-looking information and statements may include, among others, statements regarding the future plans, costs, objectives or performance of Colt Resources Inc. (the "Company"), or the assumptions underlying any of the foregoing. In this news release, words such as "may", "would", "could", "will", "likely", "believe", "expect", "anticipate", "intend", "plan", "estimate" and similar words and the negative form thereof are used to identify forward-looking statements. Forward-looking statements should not be read as guarantees of future performance or results, and will not necessarily be accurate indications of whether, or the times at or by which, such future performance will be achieved. Forward-looking statements and information are based on information available at the time and/or management's good-faith belief with respect to future events and are subject to known or unknown risks, uncertainties, assumptions and other unpredictable factors, many of which are beyond the Company's control. These risks, uncertainties and assumptions include, but are not limited to, those described under "Risk Factors" in the Company's revised annual information form dated April 20, 2011 available on SEDAR at www.sedar.com and could cause actual events or results to differ materially from those projected in any forward-looking statements. The Company does not intend, nor does the Company undertake any obligation, to update or revise any forward-looking information or statements contained in this news release to reflect subsequent information, events or circumstances or otherwise, except if required by applicable laws. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. SOURCE COLT RESOURCES INC. PDF with caption: "Tabuaço Exploration Summary". PDF available at: http://stream1.newswire.ca/media/2012/02/22/...C6279_DOC_EN_10297.pdf Source: PR Newswire (February 22, 2012 - 9:29 AM EST) News by QuoteMedia www.quotemedia.com

 

Gehört hier auch hinein. Erfolgreicher Mann im Aufspüren erfolgreicher Explorer in den letzten Jahren übrigens, dieser Herr Stoeferle von der Ersten:

Die Juwelen unter den Juniors
...

Ronald-Peter Stoeferle

Der letzte der konsultierten Experten, Ronald-Peter Stoeferle, der für die Erste Bank AG tätig ist, sucht vor allem nach Unternehmen mit einer Marktkapitalisierung von mindesten 200 Mio. USD, beobachtet aber auch drei Juniors deren Erfolgschancen er als sehr gut einschätzt: Bowmore Exploration, Rye Patch Gold und Colt Resources. ...

Der Gold- und Wolfram-Explorer Colt Resources ist in Portugal aktiv. Stoeferle sieht großes Potential für dieses Unternehmen, weil Portugal noch viel zu wenig exploriert sei und aufgrund der Wirtschaftskrise in Europa unter Druck steht, seine Ressourcen zu entwickeln.

Quelle: http://www.rohstoff-welt.de/news/artikel.php?sid=34044#Die-J…

Salve,
Tasche

 

kommt in Fahrt :-)  

andere Goldwerte von Anfang an mitgeritten(Osisko)

Wie vorhergesagt -Warrants ausgelaufen , der Kurs kommt. Jetzt PDAC mit
"rund-um-den-Tag" Terminen .
Es stehen einige große Jungs an der Außenlinie, die leicht Gas geben können.
es gibt kaum ein Gebiet auf dem mehr Oligarchen rumgelaufen sind :-)
In sechs Monaten wird niemand die Firma wiedererkennen!  

Na dann hoffen wir doch mal auf eine gritzegrüne Woche...!  

Sehr schöne Mineralisierungen (mit alten Bohrkernen ist gut bohren):

Colt Resources intersects 4.23g/t Au over 13.50m, including 7.71g/t Au over 3.50m at its Boa Fé Gold Project, Southern Portugal

Trading Symbols: GTP - (TSX-V)
                     P01 - (FRANKFURT)
                     COLTF - (OTCQX)

MONTREAL, Feb. 28 /CNW Telbec/ - Colt Resources Inc. ("Colt" or the "Company") (TSXV: GTP) (FRA: P01) (OTCQX: COLTF) is pleased to announce that it has received final analytical results for five holes from the ongoing drilling campaign on its Boa Fé gold project, located within the Company's 100% owned 47Km2 Boa Fé Experimental Mining License (EML) in southern Portugal. The Boa Fé EML is completely surrounded by the Company's 100% owned (732Km2) Montemor exploration concession.

The results are highlighted as follows:

--------------------------------------------------
    Drill hole BFCH-12-002 (Vertical) - 51.25m deep
    --------------------------------------------------
    No significant mineralization
    --------------------------------------------------
    Drill hole BFCH-12-003 (Vertical) - 53.60m deep
    --------------------------------------------------
                From (m)         To (m)     Grade g/t Au  Interval (m)*
    --------------------------------------------------
                  20.80          34.30          4.23          13.50
    --------------------------------------------------
    (Including)   30.80          34.30          7.71           3.50
    --------------------------------------------------
    Drill hole BFCH-12-005 (Vertical) - 55.90m deep
    --------------------------------------------------
    No significant mineralization
    --------------------------------------------------
    Drill hole BFCH-12-006 (Vertical) - 75.20m deep
    --------------------------------------------------
                From (m)         To (m)     Grade g/t Au  Interval (m)*
    --------------------------------------------------
                  26.75          34.76          1.88           8.01
    --------------------------------------------------
    Drill hole BFCH-12-007 (Vertical) - 55.45m deep
    --------------------------------------------------
    No significant mineralization
    --------------------------------------------------
    * True Width has not been determined at this time.

Nikolas Perrault, President and CEO of Colt, stated, "As positive results continue to arrive, we are confident that our team is developing a firm understanding of this deposit which will support an acceleration of the aggressive exploration campaign already underway designed to confirm and expand the potential of this project."

Program Strategy

Gold mineralization has been identified in several shallow deposits along a shear zone that extends over some 30 Kilometers along strike (Figure 1). Previous drilling (Figure 2) was focussed on the highest grading portions of gold anomalies that closely follow the regional shear. The mineralisation style interpreted in the current model (Figures 3a and 3b) is associated with shears at low-angle to the regional shear direction (S1, S2, T and R) developed due to contrasts in competency between granitic and silica-rich units with pelitic schist within the main regional shear zone. Where conjugate sets of shears (i.e. S1 and S2 with T) the best development of mineralisation occurs. Conjugate sets of mineralisation may occur anywhere within the regional shear zone and are not restricted by depth. Minimal drilling has been performed to test depth extensions below an average of 100 metres or along strike between known mineralized deposits. Given the shear zone style of mineralization and extensive gold anomalies in soils, there is good potential to build upon previous work that supported several non NI43-101 compliant resource estimates that range from 150koz to 550koz of gold as defined over the period 1991-2008 (see press release March 7, 2011).

Colt will continue to test its current ideas on structural interpretation against previous models and aim to finalize a 3D model that incorporates the concept of conjugate shear orientations reinforcing each other and leading to higher grades of gold mineralization. The company will continue its aggressive advanced stage exploration campaign consisting of a combination of vertical and inclined drill holes positioned to confirm previous drilling results at Casas Novas, Ligeiro, Braços and Banhos deposits and investigate the gaps between Chaminé-Casas Novas and Chaminé-Ligeiro to increase resource potential. Results currently being interpreted from geophysical exploration (resistivity and seismic orientation surveys across Chaminé) will greatly assist in advancing targets in the gap areas. High priority regional targets identified through field prospecting will also be tested. The results of this phase of work will form the basis for an initial NI 43-101 compliant resource estimate to be prepared later in 2012 covering several previously drilled gold bearing deposits within the Boa Fé EML.

Quality Assurance / Quality Control (QA/QC)

Sample intervals are reported as metres (m) down hole and as such do not represent true widths of mineralized intersections. The morphology of the gold mineralization is yet to be determined.

All drill core is transported by Company personnel from drill site to a nearby secure storage facility for logging and sampling. Sampling intervals are defined after core logging and determination of probable high grade zones based on visible mineralisation and favourable structure. One half of the core is sent for analysis, while the other half is retained in the core boxes for future reference.

All samples are sent by courier to ALS Chemex's facility in Seville, Spain, where they undergo sample preparation. The resulting pulps are shipped by ALS to their laboratory in Romania for gold assay and routine ICP multi-element analysis. Gold analysis for all samples is done via method "Au - AA23" (Au by fire assay and AAS, 30g nominal sample weight). The detection limit for this method is 5 ppb. For every sample with Au values over 3 ppm, the pulp is re-analyzed by method "Au - GRA21" (Au by fire assay and gravimetric finish, 30g nominal sample weight). The detection range for this method is 0.05-1000 ppm.

A set of standards and blanks has been inserted by Colt into the sample stream on a regular basis in addition to the laboratory's own internal QA/QC standards and duplicates. QA/QC results to date are well within the accepted norm.

About Colt Resources Inc.

Colt Resources Inc. is a Canadian junior exploration company engaged in acquiring, exploring, and developing mineral properties with an emphasis on gold and tungsten. It is currently focused on advanced stage exploration projects in Portugal, where it is the largest lease holder of mineral concessions.

SRK ES Director - Gareth O'Donovan CEng MSc BA (Hons) FIMMM FGS, is the independent qualified person, as defined in NI 43-101, for Colt's projects in Portugal. Mr. O'Donovan has reviewed the content of this press release, and consents to the information provided in the form and context in which it appears.

The Company's shares trade on the TSX-V, symbol: GTP; the Frankfurt Stock Exchange, symbol: P01; and, the OTCQX, symbol: COLTF.  ...

Quelle: http://www.newswire.ca/en/story/928889/...d-project-southern-portugal

Salve,
Tasche :)

 

der Zeit für Goldresultate.
Ende des Monats ist wieder ein größerer "Field Trip" mit Investoren und Analysten.  

Colt Resources intersects 5.28g/t Au over 15.39m, including 9.99g/t Au over 3.43m at its Boa Fé Gold Project, Southern Portugal.


 

Trading Symbols: GTP - (TSX-V)
P01 - (FRANKFURT)
COLTF - (OTCQX)

MONTREAL, March 15, 2012 /CNW Telbec/ - Colt Resources Inc. ("Colt" or the "Company") (TSXV: GTP) (FRA: P01) (OTCQX: COLTF) is pleased to announce that it has received final analytical results for 5 holes and 1 trench from the ongoing drilling and trenching campaign on its Boa Fé gold project, located within the Company's 100% owned 47Km2 Boa Fé Experimental Mining License (EML) in southern Portugal.   The Boa Fé EML is completely surrounded by the Company's 100% owned (732Km2) Montemor exploration concession.

The results from the Chaminé and Ligeiro deposits are highlighted as follows:


 
Chaminé Deposit  
Drill hole BFCH-12-004 (Inclined -55 o to 085 o) - 254.15m deep  
  From (m)  To (m)  Grade g/t Au  Interval (m)*  
  106.45  120.40  1.90  13.95  
(Including)  114.00  118.00  3.76  4.00  
Drill hole BFCH-12-008 (Vertical) - 64.40m deep  
No significant mineralization  
Drill hole BFCH-12-009 (Inclined -50 o to 255 o) - 90.34m deep  
  From (m)  To (m)  Grade g/t Au  Interval (m)*  
  38.84  54.23  5.28  15.39  
(Including)  43.08  46.59  9.71  3.51  
(Including)  50.80  54.23  9.99  3.43  
  63.50  69.84  1.64  6.34  
Drill hole BFCH-12-011 (Vertical) - 58.80m deep  
  From (m)  To (m)  Grade g/t Au  Interval (m)*  
  41.95  46.30  1.77  4.35  
Ligeiro Deposit  
Drill hole BFLG-12-001 (Vertical) - 65.10m deep  
  From (m)  To (m)  Grade g/t Au  Interval (m)*  
  8.59  11.24  1.98  2.65  
Trench BFLGT-12-001 (Horizontal 0 o to 255 o) - 271.40m long  
  From (m)  To (m)  Grade g/t Au  Interval (m)*  
  194.00  196.00  1.05  2.00  

* True Width has not been determined at this time.

Nikolas Perrault, President and CEO of Colt, stated, "As promised, we are providing regular updates from our Boa Fé Gold project.  We have broadened our drilling and trenching efforts to include the Ligeiro deposit and we are pleased to see continued positive near surface results.  In the weeks ahead, we also expect to begin to report results from the nearby Casas Novas deposit as we further expand the campaign currently underway which is designed to confirm and increase the potential of this very exciting gold project ."

Program Strategy

Gold mineralization has been identified in several deposits along a shear zone that extends over some 30 Kilometers along strike (Figure 1).  Previous shallow drilling (Figure 2) was focussed on the highest grading portions of gold anomalies that closely follow the regional shear.  The mineralisation style interpreted in the current model (Figure 3) is associated with shears at low-angle to the regional shear direction (S1, S2, T and R) developed due to contrasts in competency between granitic and silica-rich units and pelitic schist within the main regional shear zone. Where conjugate sets of shears occur (i.e. S1 and S2 with T) the best development of mineralisation occurs. Conjugate sets of mineralisation may occur anywhere within the regional shear zone and are not restricted by depth.

Hole BFCH-12-009 is the last hole in a fence-line drilled along section line 6400N at Chaminé and was drilled in the reverse direction to previous drill campaigns to get better definition of the high grade zone with respect to the low angle shear model (see press release February 28, 2012) and fill in a gap interval in a neighbouring previous hole which was not sampled. The results correlate with the current model for this section within +/- 3m tolerance.

Colt will continue to test its current ideas on structural interpretation against previous models and aim to finalize a 3D model that incorporates the concept of conjugate shear orientations reinforcing each other and leading to higher grades of gold mineralization. The company will continue its aggressive advanced stage exploration campaign consisting of a combination of vertical and inclined drill holes positioned to confirm previous drilling results at Casas Novas, Ligeiro, Braços and Banhos deposits and investigate the gaps between Chaminé-Casas Novas and Chaminé-Ligeiro to increase resource potential.  Results currently being interpreted from geophysical exploration (resistivity and seismic orientation surveys across Chaminé) will greatly assist in advancing targets in the gap areas. High priority regional targets identified through field prospecting will also be tested.  The results of this phase of work will form the basis for an initial NI 43-101 compliant resource estimate to be prepared later in 2012 covering several previously drilled gold bearing deposits within the Boa Fé EML.

Minimal drilling has been performed to test depth extensions below an average of 100 metres or along strike between known mineralized deposits.  Given the shear zone style of mineralization and extensive gold anomalies in soils, there is good potential to build upon previous work that supported several non NI43-101 compliant resource estimates that range from 150koz to 550koz of gold as defined over the period 1991-2008 (see press release March 7, 2011).

Quality Assurance / Quality Control (QA/QC)

Drill sample intervals are reported as metres (m) down hole and as such do not represent true widths of mineralized intersections. All drill core is transported by Company personnel from drill site to a nearby secure storage facility for logging and sampling. Sampling intervals are defined after core logging and determination of probable high grade zones based on visible mineralisation and favourable structure. One half of the core is sent for analysis, while the other half is retained in the core boxes for future reference.

Trench samples are collected from bedrock exposed at the base of a trench excavated by a backhoe and cleaned and mapped prior to sample collection.  Trench channel samples are collected using hammer and chisel and are generally two metres (m) long with an average width of 10 centimetres (cm).  Channel samples are bagged on site and sent for analysis.

All samples are sent by courier to ALS Chemex's facility in Seville, Spain, where they undergo sample preparation. The resulting pulps are shipped by ALS to their laboratory in Romania for gold assay and routine ICP multi-element analysis. Gold analysis for all samples is done via method "Au - AA23" (Au by fire assay and AAS, 30g nominal sample weight). The detection limit for this method is 5 ppb. For every sample with Au values over 3 ppm, the pulp is re-analyzed by method "Au - GRA21" (Au by fire assay and gravimetric finish, 30g nominal sample weight). The detection range for this method is 0.05-1000 ppm.

A set of standards and blanks has been inserted by Colt into the drill sample stream on a regular basis in addition to the laboratory's own internal QA/QC standards and duplicates. QA/QC results to date are well within the accepted norm.

About Colt Resources Inc.

Colt Resources Inc. is a Canadian junior exploration company engaged in acquiring, exploring, and developing mineral properties with an emphasis on gold and tungsten. It is currently focused on advanced stage exploration projects in Portugal, where it is the largest lease holder of mineral concessions.

SRK ES Director - Gareth O'Donovan CEng MSc BA (Hons) FIMMM FGS, is the independent qualified person, as defined in NI 43‐101, for Colt's projects in Portugal.  Mr. O'Donovan has reviewed the content of this press release, and consents to the information provided in the form and context in which it appears.

The Company's shares trade on the TSX‐V, symbol: GTP; the Frankfurt Stock Exchange, symbol: P01; and, the OTCQX, symbol: COLTF.  

Salve,

Tasche

 

sind das eine- gute Kurse das WICHTIGE.  

Wie man diesem Interview

http://www.stock-telegraph.com/...erview-mit-colt-resources-inc-news/

entnehmen kann sind nun:

5 Bohrer auf BoaFe (Gold) und

4 Bohrer auf Tabuaco (Wolfram)

 

im Einsatz !

 

 

 

kommen.
Der Markt wirds irgendwann honorieren :-)
Gold wird jetzt erstmal richtig runtergehen und danach gehts los.
Mit 3 Millionen Unzen Gold in Portugal ist die Firma(ohne Tungsten) 400 Mios wert!  

Colt Resources intersects 1.25% WO3 over 6.05m and 0.44% WO3 over 8.05m including 0.51% WO3 over 4.05m at its Aveleira Tungsten Discovery, Northern Portugal
   <<
   Trading Symbols: GTP - (TSX-V)
                    P01 - (FRANKFURT)
                    COLTF - (OTCQX)
   >>


MONTREAL, March 20 /CNW Telbec/ - Colt Resources Inc. ("Colt" or the "Company") (TSXV: GTP) (FRA: P01) (OTCQX: COLTF) is pleased to announce that it has received final analytical results for the Aveleira discovery hole (DHT-49) previously announced on February 22nd, 2012. The Aveleira tungsten target, is located approximately 750m north of the delineated resource at the Tabuaço (São Pedro das aguias) tungsten deposit (Figure 1), both are located in the Company's wholly owned Armamar-Meda concession in northern Portugal.

The results of this significant new discovery comprise intersections of two zones of sub-parallel skarn hosted mineralization. Since the announcement of February 22nd, two additional holes have been completed 30m to the north and 30m to the south of DHT-49 and similar mineralized intervals have been intersected (assay results pending) (Figure 2). The results for the upper main skarn horizon do not include the top 3m of the mineralized zone which was severely weathered and poorly recovered. It is therefore anticipated that as the weathering diminishes with depth from surface the average thickness of the mineralized zone could be larger than that reported.

Nikolas Perrault, President and CEO of Colt, stated, "The results from this discovery hole confirm that our Tabuaco deposit has the potential to be expanded considerably. We are very pleased with this latest development and look forward to being able to release results from the nearby confirmation holes as soon as possible."

These results are part of an ongoing drilling program designed to test extensions and nearby mineralized skarn horizons with similar characteristics to the main deposit at Tabuaço. An initial NI43-101 compliant resource estimate was reported for Tabuaço on November 7th, 2011.

The results for DHT-49 are highlighted as follows:


   <<
   --------------------------------------------------
   Drill hole DHT-49 (Vertical) - 65.20m deep
   --------------------------------------------------
   Zone          From (m)     To (m)    Grade %     Interval    True Width
                                          WO(3)          (m)         (m)*
   --------------------------------------------------
   Main            24.40       30.45      1.25%        6.05(xx)       5.69
   --------------------------------------------------
   Lower           46.95       55.00      0.44%        8.05           7.56
   --------------------------------------------------
         Including 50.95       55.00      0.51%        4.05           3.81
   --------------------------------------------------
   *  True Width was determined assuming the mineralization has an average
        strike of 315(degrees) and an average dip of -20(degrees).
   (xx) Results for the 3m interval immediately above this have not been
        reported due to poor core recovery.
   >>


Quality Assurance / Quality Control (QA/QC)


Sample intervals are reported as both metres (m) downhole and as true thickness, which have been calculated using cross sectional interpretation of the mineralized intercepts in three dimensions. The actual dip of the skarn controlled mineralization is generally shallow with an average dip of -20(degrees).

All drill core is transported by Company personnel from drill site to a nearby secure storage facility for logging and sampling. Sampling intervals are defined after core logging and determination of scheelite content by examination under short-wave UV-light. One half of the core is sent for analysis, while the other half is retained in the core boxes for future reference.

Samples are sent by courier to ALS Laboratory Group, Seville, Spain. Samples are analyzed for W and Sn using a metaborate fusion followed by XRF. Assay results for tungsten are reported by the laboratory as W%. WO(3) values are calculated using a conversion factor of 1.2611.

A set of standards, duplicates and blanks is inserted by Colt into the sample stream on a regular basis in addition to the laboratory's own internal QA/QC standards and duplicates. QA/QC results to date are well within the accepted norm.


About Colt Resources Inc.


Colt Resources Inc. is a Canadian junior exploration company engaged in acquiring, exploring, and developing mineral properties with an emphasis on gold and tungsten. It is currently focused on advanced stage exploration projects in Portugal, where it is the largest lease holder of mineral concessions.

SRK ES Director - Gareth O'Donovan CEng MSc BA (Hons) FIMMM FGS, is the independent qualified person, as defined in NI 43-101, for Colt's projects in Portugal. Mr. O'Donovan has reviewed the content of this press release, and consents to the information provided in the form and context in which it appears.

The Company's shares trade on the TSX-V, symbol: GTP; the Frankfurt Stock Exchange, symbol: P01; and, the OTCQX, symbol: COLTF.



FORWARD-LOOKING STATEMENTS: Certain of the information contained in this news release may contain "forward-looking information". Forward-looking information and statements may include, among others, statements regarding the future plans, costs, objectives or performance of Colt Resources Inc. (the "Company"), or the assumptions underlying any of the foregoing. In this news release, words such as "may", "would", "could", "will", "likely", "believe", "expect", "anticipate", "intend", "plan", "estimate" and similar words and the negative form thereof are used to identify forward-looking statements. Forward-looking statements should not be read as guarantees of future performance or results, and will not necessarily be accurate indications of whether, or the times at or by which, such future performance will be achieved. Forward-looking statements and information are based on information available at the time and/or management's good-faith belief with respect to future events and are subject to known or unknown risks, uncertainties, assumptions and other unpredictable factors, many of which are beyond the Company's control. These risks, uncertainties and assumptions include, but are not limited to, those described under "Risk Factors" in the Company's revised annual information form dated April 20, 2011 available on SEDAR at www.sedar.com and could cause actual events or results to differ materially from those projected in any forward-looking statements. The Company does not intend, nor does the Company undertake any obligation, to update or revise any forward-looking information or statements contained in this news release to reflect subsequent information, events or circumstances or otherwise, except if required by applicable laws.  

nach Gold nun wieder Wolfram, das mir besser gefällt. Ich würde Wolfram gerne noch weiter von Colt Res. allein weiter exploriert sehen.

Salve,

Tasche

 

Ist hier jedem bewusst was die Pressemeldung von gestern bedeutet ?

Wenn man 750m entfernt von der 43-101 bestätigten Resource genau die gleichen Zonen wiederentdeckt, dann ist es naheliegend das diese sich auch dazwischen finden lassen.
Diese Gebiet wurde bis jetzt noch nicht gebohrt, was Colt ja aber bereits begonnen hat.

Damit läßt sich die bisherige Resource vervielfachen !
Wenn die 750m vollständig mineralisiert sind wäre ein Faktor 5 drin meine ich.
Das wären dann 10 Mio t mit gut 0,5% WO3.
Damit lässt sich eine ganz ordentliche Mine bauen.
Die Mineralisierung bleibt ja auch noch weiterhin offen in den Hügel hinein.

Spannendes Warten auf die nächsten Ergebnisse...

 

Colt Resources intersects 4.46g/t Au over 19.60m, including 14.92g/t Au over 3.43m at its Boa Fé Gold Project, Southern Portugal


                                         Trading Symbols: GTP - (TSX-V)
                                                          P01 - (FRANKFURT)
                                                          COLTF - (OTCQX)


MONTREAL, March 26 /CNW Telbec/ - Colt Resources Inc. ("Colt" or the "Company") (TSXV: GTP) (FRA: P01) (OTCQX: COLTF) is pleased to announce that it has received final analytical results corresponding to four recently completed drillholes from the ongoing drilling and trenching campaign on its Boa Fé gold project, located within the Company's 100% owned (47Km2) Boa Fé Experimental Mining License (EML) in southern Portugal. The Boa Fé EML is completely surrounded by the Company's 100% owned (732Km2) Montemor exploration concession.

The results from the Chaminé, Ligeiro and Casas Novas deposits are highlighted as follows:


   --------------------------------------------------
   Chaminé Deposit
   --------------------------------------------------
   Drill hole BFCH-12-010 (Inclined -55(degrees) to 085(degrees)) -
   288.15m long
   --------------------------------------------------
                   From (m)     To (m)     Grade g/t Au    Interval (m)(*)
   --------------------------------------------------
                    106.50      118.24         6.78              11.74
   --------------------------------------------------
   (Including)      114.82      118.24         8.23               3.42
   --------------------------------------------------
       And          128.93      134.38         2.61               5.45
   --------------------------------------------------
   Drill hole BFCH-12-012 (Vertical) - 63.00m long
   --------------------------------------------------
                   From (m)      To (m)    Grade g/t Au    Interval (m)(*)
   --------------------------------------------------
                     31.50       47.98          4.11             16.48
   --------------------------------------------------
   (Including)       43.32       47.98          9.71              4.66
   --------------------------------------------------
   Casas Novas Deposit
   --------------------------------------------------
   Drill hole BFCN-12-001 (Inclined -45(degrees) to 032(degrees)) -
   157.55m long
   --------------------------------------------------
                   From (m)     To (m)     Grade g/t Au    Interval (m)(*)
   --------------------------------------------------
                     57.70       77.30          4.46             19.60
   --------------------------------------------------
   (Including)       57.70       61.13         14.92              3.43
   --------------------------------------------------
   Ligeiro Deposit
   --------------------------------------------------
   Drill Hole BFLG-12-002 (Vertical) - 94.30m long
   --------------------------------------------------
                   From (m)     To (m)     Grade g/t Au    Interval (m)(*)
                     16.85       22.06          3.51              5.21
   --------------------------------------------------
               (*) True Width has not been determined at this time.


Nikolas Perrault, President and CEO of Colt, stated, "We have commenced the process of unlocking value at Casas Novas, located 400m NW of the Chaminé deposit. These initial near surface results combined with the additional positive near surface results from Chaminé and Ligeiro being reported today, strengthen our resolve to continue our aggressive advanced exploration campaign designed to rapidly develop several previously identified gold deposits located within our 100% controlled Boa Fé project."


Program Strategy


Gold mineralization has been identified in several deposits along a shear zone that extends over some 30 Kilometers along strike (Figure 1). Previous shallow drilling (Figure 2) was focussed on the highest grading portions of gold anomalies that closely follow the regional shear. The mineralisation style interpreted in the current model assumes that high grade gold mineralisation occurs where conjugate sets of shears intersect and reinforce each other (refer to press release 15th March 2012).

Hole BFCH-12-012 was drilled on a short fence-line along section line 6525N at Chaminé. BFCH-12-011 (reported in press release 15th March 2012) was the first hole drilled on this fence. These holes were drilled vertically to get a better definition of the high grade zone which was outlined in an area previously drilled with holes inclined to the north-east (Figure 3). The intersections increase the volume of high grade material above 1g/t Au in this zone and also strengthen the model concept outlined above. This model links the elevated gold mineralization with conjugate shear sets that intersect at shallow angles, creating more space for the passage of gold mineralising fluids.

Hole BFCH-12-010 is a relatively deep inclined hole (deeper than 100m) drilled along section line 6600N at Chaminé which has been successful in intersecting mineralisation in a gap in the northern half of the deposit, where no drilling was performed previously. By infilling this gap, confidence in the resource in this part of the deposit has been significantly improved (see location on Figure 2).

Hole BFCN-12-001 is the first hole in the program to validate previous historical results at Casa Novas and twins a hole previously drilled on behalf of RioFinex. There appears to be an acceptable correlation between the two sets of results in terms of grade and grade distribution. Hole BFLG-12-002 confirms the presence of significant mineralization at Ligeiro reported by the historical drilling.

Colt will continue to test its current ideas on structural interpretation against previous models and aims to finalize a 3D model that incorporates the concept of conjugate shear orientations reinforcing each other and leading to higher grades of gold mineralization. The Company will continue its aggressive advanced stage exploration campaign at Boa Fé consisting of a combination of vertical and inclined drill holes positioned to confirm previous drilling results at the Chaminé, Casas Novas, Ligeiro, Braços and Banhos deposits and investigate the gaps between Chaminé-Casas Novas and Chaminé-Ligeiro to increase resource potential. Results currently being interpreted from geophysical exploration (resistivity and seismic orientation surveys across Chaminé) will greatly assist in advancing targets in the gap areas. High priority regional targets identified through field prospecting will also be tested. The results of this phase of work will form the basis for an initial NI 43-101 compliant resource estimate to be prepared later in 2012 covering several previously drilled gold bearing deposits within the Boa Fé EML.

Minimal drilling has been performed to test depth extensions below an average of 100 metres or along strike between known mineralized deposits. Given the shear zone style of mineralization and extensive gold anomalies in soils, there is good potential to build upon previous work that supported several non NI43-101 compliant resource estimates (see press release March 7, 2011).


Quality Assurance / Quality Control (QA/QC)


Drill sample intervals are reported as metres (m) down hole and as such do not represent true widths of mineralized intersections. All drill core is transported by the Company personnel from drill site to a nearby secure storage facility for logging and sampling. Sampling intervals are defined after core logging and determination of probable high grade zones based on visible mineralisation and favourable structure. The core is halved using a rotary diamond blade core saw, with one half of the core sent for analysis, while the other half is retained in the core boxes for future reference.

All half core samples are sent by courier to ALS Chemex's facility in Seville, Spain, where they undergo sample preparation. The resulting pulps are shipped by ALS to their laboratory in Romania for gold assay and routine ICP multi-element analysis. Gold analysis for all samples is done via method "Au - AA23" (Au by fire assay and AAS, 30g nominal sample weight). The detection limit for this method is 5 ppb. For every sample with Au values over 3 ppm, the pulp is re-analyzed by method "Au - GRA21" (Au by fire assay and gravimetric finish, 30g nominal sample weight). The detection range for this method is 0.05-1000 ppm.

A set of standards and blanks has been inserted by Colt into the drill sample stream on a regular basis in addition to the laboratory's own internal QA/QC standards and duplicates. QA/QC results to date are well within the accepted norm.  

für einen 30 Km langen Goldgürtel in Portugal

(+ Wolfram ein - noch - witziges Preisschildchen).

Salve,

Tasche

 

http://www.finanznachrichten.de/...uf-seinem-boa-fe-gold-proj-016.htm  

Ask bleibt schon zugestopft.
Da ist ein größerer verkäufer am Werk.
Alleine 320K bei 0,56 über UBS