Mentor Graphics eine neue Ära beginnt

von Valor wird wohl sehr positiv gesehen.Valor war zuletzt ja eigentlich auch gut aufgestellt.Könnte mal Gewinnmitnahmen geben,aber der Trend stimmt doch.M.E. nach sollte man dabei bleiben.
Passiert ja momentan auch viel.Mentor haut noch´ne Meldung raus:
Grüße,Heiko Thieme

Mentor Graphics Extends DO-254 Platform Offering With Enhanced HDL Coding Standards

WILSONVILLE, OR, Apr. 13, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 04/13/10 -- Mentor Graphics Corp. (NASDAQ: MENT), a leading electronic design automation (EDA) solutions provider, today announced the availability of the HDL Designer™ tool's enhanced set of HDL coding checks for DO-254 compliance. This is the latest addition to Mentor's unique platform of tools that enable a requirements-driven flow from development through verification for safety-critical design.

RTCA/DO-254 "Design Assurance Guidance for Airborne Electronic Hardware" is a standard that is currently being enforced by the Federal Aviation Administration (FAA), European Aviation Safety Agency (EASA), and other worldwide aviation certification agencies to ensure the safety of in-flight hardware. Compliance to DO-254 can be very costly, and as more programs have to comply, more companies are looking for ways to reduce the cost of compliance. One way to do this is to use tools to automate or facilitate key aspects of the process.

Recent policy has mandated that DO-254 programs have a document set of HDL coding standards as well as a mechanism to review code against these standards. DO-254 does not specify what the coding standards should be so each company must determine this for themselves. The DO-254 rule set included in the HDL Designer tool was developed by input from numerous companies developing safety-critical designs, and an initiative led by Mentor in the DO-254 User's Group to create a foundational set of HDL coding checks that could be used in DO-254 programs.

"Saab has been using the automated HDL code checking capability in HDL Designer for our aviation projects with great success for years," said Hakan Forsberg, Specialist in Safety-Critical Electronics and Computers at Saab in Jonkoping. "Especially with the recent enhancements, we've found that automating our safety-critical design rules with HDL Designer has allowed us to save a tremendous amount of time by complementing our manual reviews and has also helped us improve our code quality."

"Many companies are struggling to develop a good set of HDL coding standards to comply with the recently-defined policy requirements," said Tammy Reeve, President of Patmos Engineering Services, DER and US DO-254 User Group Chair. "Mentor's effort in the DO-254 User Group to help define a foundational set of HDL coding standards for DO-254 programs is very valuable for the aviation industry."

"Thales Airborne Computer Solutions uses Mentor tools in its DO-254 standard flow. We have found great value in using the code checker in HDL Designer to automate the checking of our HDL coding standards," said Alain Giraudat, FPGA Team Manager and Hardware Methodology Manager. "This tool provides an efficient solution to check our HDL coding rules while avoiding a huge and unacceptable amount of independent verification work required to be compliant with this aspect of DO-254."

"Mentor has been involved and investing in solutions to drive down the cost of DO-254 compliance for several years," said Michelle Lange, DO-254 Program Manager at Mentor Graphics. "Our customers have been instrumental in helping us define and implement new capabilities in our DO-254 platform. Mentor's broad range of industry-leading technologies allows us to support this market like no other vendor can, and we continue to strengthen our offering."

About Mentor's DO-254 Platform
Mentor's platform of tools supporting DO-254 compliance for FPGAs and ASICs includes: the ReqTracer™ tool, which manages and traces device requirements through development and verification activities; the Vista™ tool, which delivers a platform for conceptual design; the HDL Designer tool, which provides the environment for HDL development, code checking, code visualizations, review assistance, and structured project guidance; the ModelSim® tool, and the more advanced verification capabilities offered by the Questa® platform, which support requirements-based simulation of the HDL and netlist models; the 0-In® CDC tool for clock-domain crossing analysis; Formal methods tools, the 0-In Formal Verification tool for formal model checking, and the FormalPro™ tool for logical equivalency checking, to augment simulation; and the Precision® Synthesis tool, which offers FPGA vendor-independent synthesis, integration with place and route tools, and special features to ensure accurate and safer netlist results. Mentor's PCB and system level tools also provide a requirements-driven flow DO-254 compliance at higher levels of design. Mentor's expansive DO-254 offering is unique in the industry. For more information, visit www.mentor.com/go/do-254.

About the DO-254 User Group
The DO-254 User Group is an industry representative entity, created to share experiences in addressing the hardware aspects of certification. Initially focused on climbing the learning curve, the Group has now reached a high level of maturity and is working on developing best practices and proposing industry positions to Certification Authorities related to a number of important topics. SEH activities, IP development, COTS usage, verification coverage, best practices for HDL coding, and SoC development are examples of the current subjects being addressed by the Group.

The EU group is chaired by Aeroconseil, and participants include Actel, Aeroconseil, Airbus Operations, Airbus Military, Altera, ARM, Barco, EADS Security and Defense, IoxOS, Latecoere, Mentor Graphics, MTU Engines, Rockwell Collins, SystiQ, Thales Avionics, Thales Communications, TTTech, and Xilinx.

The US group is chaired by Patmos Engineering Services, and participants include Actel, Altera, Astronautics, BAE Systems, Boeing, ChipX, ENEA, FAA Consultants, Hamilton Sundstrand, Honeywell, Mentor Graphics, Rockwell Collins, Rolls Royce, Sagem, and Xilinx. Learn more at http://www.do254.com.

Source: Marketwire (April 13, 2010 - 9:02 AM EDT)

News by QuoteMedia
www.quotemedia.com  

Aufsteigendes und sich verjüngendes Dreieck, beste Voraussetzungen für einen Ausbruch im Juli nach Norden.
Wir werden sehen?
Die Informationspolitik ist jedenfalls in Ordnung, vielleicht entdecken diese Perle auch noch Institutionelle nebst Analysten.
Gruß urbommel  

könnte so weiter gehen, ich bin gespannt ob meine Widerstandslinie nach Norden durchbrochen wird?
Gruß urbommel  

geknackt werden, dann habt ihr das Glück des Tüchtigen erwischt.
Dann ist der längerfristige Abwärtstrend geknackt !
Und ich habe mich verpokert- am letzten Tag, genau  zum  Beginn einer Hausse ??
Aber prallt der Kurs jetzt, morgen oder Montag zurück, dann wird es ganz spannend.  

das wars noch nicht! Wenn der Chart im Dreieck bleibt, bin ich schon zufrieden, der Ausbruch müsste dann im Juli starten, natürlich nach oben, sonst wäre alles zu spät.
Ich sehe die Entwicklung mit äußerster Zurückhaltung, ich habe schon Pferde vor der Apotheke kotzen gesehen.
gruß urbommel  

und hat sich auch bei kürzlich schwacher börse sehr stabil gezeigt.
Und noch ne Meldung:

Mentor Graphics Veloce Emulation Platform Adopted by STMicroelectronics to Accelerate Time-to-Market for Its New Generation Set-Top-Box Chip Sets

WILSONVILLE, OR, Apr. 15, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 04/15/10 -- Mentor Graphics Corp. (NASDAQ: MENT), a leader in high-performance system verification solutions, today announced that STMicroelectronics' Home Entertainment and Display group (HED), a leader in the provision of digital consumer applications, has adopted the Veloce® platform for the system-level validation of its next-generation of digital Systems-on-Chip (SoC) for High-Definition (HD) Set-Top-Box (STB) applications.

STMicroelectronics (ST) chose the Veloce platform due to its high performance, state-of-the-art Testbench XPress (TBX) transaction-based environment, and extensive portfolio of iSolve™ vertical market solutions for the validation of digital standards associated with HDTV and STB.

"Meeting time-to-market goals for our digital consumer products requires advanced solutions that ensure the quality and integrity of our next-generation SoCs," said Thierry Bauchon, R&D Director, Home Entertainment & Displays, STMicroelectronics. "iSolve solutions have helped us anticipate and perform significant advances in the validation of our digital set-top-box chips with its associated software, bringing forward considerably more of the system-level validation of our designs during the pre-silicon phase. In particular, during the software validation process, we could boot the full system using a real Ethernet connection, and decode video frames that we then transmitted over HDMI and analyzed to ensure compliance with the standard, allowing us to better meet our goals and achieve robust system validation."

The Veloce platform is the industry's fastest dual-mode accelerator/emulator available, providing MHz performance for both transaction-based verification and traditional in-circuit emulation (ICE). With an extensive portfolio of vertical market solutions, the Veloce platform is the platform of choice for multimedia, networking, wireless, and embedded systems applications.

"Mentor has demonstrated for several years the leadership we have attained in the accelerated verification of multimedia-based applications with our Veloce platform and iSolve solutions," said Eric Selosse, Mentor Emulation Division vice president and general manager. "Additionally, we have gained the premier position in delivering high-speed, transaction-based methodologies to a wide user base with our flagship product TBX. It is especially rewarding to see ST's successful use of our advanced technologies in both of these areas, and we look forward to supporting ST on future projects with Veloce."

Source: Market Wire (April 15, 2010 - 9:01 AM EDT)

News by QuoteMedia
www.quotemedia.com  

die Jungs bei Mentor.Daher stimmt momentan auch der Kurs.
Grüße

Mentor Graphics Announces Multicore Solutions for Symmetric and Asymmetric Multiprocessi

WILSONVILLE, OR, Apr. 22, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 04/22/10 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced the Mentor Embedded™ Nucleus® SMP (Symmetric Multiprocessing) technology and support for the Multicore Communications Application Programming Interface (MCAPI) standard for inter-processor communication (IPC), established by the Multicore Association. These Mentor Graphics technologies provide a comprehensive solution for developers of multicore and multi-OS designs for both symmetric and asymmetric multiprocessing (SMP and AMP) deployments.

The Nucleus SMP technology is an evolution of the Mentor Graphics® Nucleus Plus real-time operating system (RTOS) and was developed in close collaboration with ARM. The addition of the Mentor Graphics SMP technology creates a scalable solution enabling seamless migration of application code across the whole range of ARM® processors from Cortex™-M series processors through to the high end Cortex-A series processors. Mentor was able to develop this highly-optimized version of Nucleus SMP using the ARM RealView Compilation Tools and validate the Nucleus SMP solution on the multicore ARM Cortex-A9 MPCore™ processor using the ARM Versatile Express Cortex-A9 quad core development board and the ARM Fast Models Cortex-A9 simulator.

"Mentor's Nucleus SMP capability using the ARM Cortex-A9 platform will allow our mutual customers to develop high-performance, power-efficient multicore designs with confidence and greater productivity," said John Goodacre, director of program management, Processors Division, ARM. "Our successful hardware and software collaboration with Mentor further demonstrates the importance of tight relationships for innovating technology."

Nucleus SMP leverages the full range of Nucleus OS middleware including the Mentor Embedded Inflexion™ User Interface (UI), networking stacks for wired and wireless communication, security, USB, and file systems.

Nucleus RTOS and Linux for MCAPI Support with Asymmetric Multiprocessing
The Mentor Graphics MCAPI solution supports both Nucleus and Linux operating systems enabling a standard interface for communication and synchronization between multiple OSs running in asymmetric multiprocessing (AMP) designs. Thus, AMP designs can leverage the standard Android- and Linux-rich feature set while the Nucleus RTOS can manage the hard real-time or safety-critical requirements.

"Mentor is addressing the challenges of mixing different operating systems, like Linux and the Nucleus RTOS, for different methods of IPC with its support of the MCAPI standard," said Markus Levy, president of The Multicore Association. "Mentor's MCAPI technology will accelerate the adoption of multiple OSs on multicore which is necessary to help meet system timing requirements for higher-quality product development."

"Our acquisition of Embedded Alley last year has allowed us to integrate Linux and Android open source for technology development, like our Nucleus SMP and MCAPI support," said Glenn Perry, general manager, Mentor Graphics Embedded Software Division. "Our multicore and multi-OS capabilities further demonstrate our continued strategy of providing the most innovative embedded development products and services to help our customers and partners become more successful."

Technologies to be demonstrated at ESC 2010
The Mentor Embedded Nucleus SMP and MCAPI technologies will be demonstrated at the Mentor Graphics booth #1902 during the Embedded Systems Silicon Valley Conference, April 26-29.

The Mentor Graphics Embedded Software Division comprises the Mentor Embedded family of products and services, including embedded software intellectual property (IP), tools, and consulting services to help embedded developers and silicon partners optimize their products for design and cost efficiency. More information on Mentor Embedded products and services can be found at the website: www.mentor.com/embedded.

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com

Sonia Harrison
Mentor Graphics
503.685.1165
sonia_harrison@mentor.com


Source: Market Wire (April 22, 2010 - 9:00 AM EDT)

News by QuoteMedia
www.quotemedia.com  

ständig an good news raushauen ist echt unglaublich.
Im Hoch heute bei 9,59 $

Mentor Graphics Selected as a Key Freescale Commercial Linux Strategic Partner for QorIQ and PowerQUICC Processors ; ;

WILSONVILLE, OR, Apr. 26, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 04/26/10 -- Mentor Graphics Corporation (NASDAQ: MENT) announced that it has signed a multi-year strategic partnership agreement with Freescale Semiconductor, Inc. naming Mentor Graphics as a key Freescale strategic commercial Linux partner. Under the agreement, the Mentor Graphics Embedded Software Division will provide commercial, Linux-based software products supporting the Freescale QorIQ™ and PowerQUICC® processors for the networking, telecommunications, military/aerospace, industrial, printing and imaging application markets. The Mentor solutions will offer broad portfolio coverage and be available at, or near, first silicon. Mentor and Freescale will also closely collaborate on product, technology and go-to-market activities.

"We chose Mentor Graphics as a key strategic Linux partner based on their exceptional embedded Linux technology and ongoing investments and commitment to innovate in creating highly-competitive commercial solutions in the open source arena," said Raja Tabet, Vice President of Software and Systems for Freescale's Networking and Multimedia Group. "We are confident that our deep collaboration with Mentor will result in an exceptional design experience for our joint customers."

Freescale's partnership with Mentor Graphics is ground breaking in terms of engineering collaboration and methodology, as Freescale expects to standardize on Mentor Graphics technology for managing open source software as the foundation for Freescale's internal Linux development efforts. This approach is expected to create a seamless transition from no-cost Linux evaluation versions to commercial editions.

The partnership with Mentor will allow Freescale customers to use the same base code throughout the design process with seamless software and tool integration, helping to minimize product performance risks. Building on 25 years of experience, Mentor Graphics provides embedded software IP, tools, and services for Linux and the Nucleus® RTOS for multi-OS on multicore development, optimized for Power Architecture® processors.

"We are excited to partner with Freescale, one of the most established and diverse makers of embedded devices in the world, serving today's best known companies. We believe that our joint collaboration will provide our mutual customers with the ideal embedded development environment and opportunities to expand into new Linux-based markets," said Glenn Perry, General Manager, Mentor Graphics Embedded Software Division. "Our experience in Freescale technologies and expertise in open source software -- based on acquired technology and resources from Embedded Alley -- places us in an ideal position to serve as a strategic Freescale Linux partner."

The Mentor Graphics Embedded Software Division comprises the Mentor Embedded™ family of products and services, including embedded software intellectual property (IP), tools, and consulting services to help embedded developers and silicon partners optimize their products for design and cost efficiency. More information on Mentor Embedded products and services can be found at the website: www.mentor.com/embedded.


Source: Market Wire (April 26, 2010 - 7:01 AM EDT)

News by QuoteMedia
www.quotemedia.com  

urbommel: Entscheidung vielleicht im Juli   14.04.10 10:17  

Ich auch!  

Schönes Wochenende !  

du auch noch dabei?
Schön von dir zu hören. Hast du den Winter bzw. die Eiszeit gut überstanden?
Ich glaube, jetzt geht es nach vorn bzw. an der Börse nach oben.
Ebenfalls schönes WE
urbommel  

Mentor Graphics Signs Exclusive Global Agreement With Automotive Supplier Magneti Marelli ;

WILSONVILLE, OR, Jul. 13, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 07/13/10 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced the signing of an exclusive, worldwide agreement with automotive electronics systems and components provider, Magneti Marelli. Valor, a division of Mentor and a global provider of productivity improvement software across the printed circuit board manufacturing supply chain, will supply its vManage™ solutions for traceability of the entire production process, from the screen printer to the Surface Mount Technology (SMT) component placement machine at the company's multiple global locations. The agreement is the culmination of a partnership which, eighteen months ago, saw Magneti Marelli decide to expand its Valor® vManage installations for assembly traceability and feeder verification worldwide, including manufacturing sites in Italy, Spain, and Mexico.

The Valor vManage software enables Magneti Marelli to achieve full traceability and visibility of materials and manufacturing processes on its multiple-vendor SMT assembly lines. The vManage product will also help the company eliminate feeder errors due to its advanced feeder verification functionality.

"Valor's software solution has more than proven itself over the past few years, not only with the great value it offers in terms of traceability and quality, but also in the vast efficiency improvements this tool offers," stated Marco Ausenda, Director of Technology and Standardization at Magneti Marelli. "This agreement will enable us to standardize our process worldwide, so that each of our facilities can take advantage of its many benefits."

The vManage product provides a complete shop floor control and material management solution that is a key component of the Valor MSS (Manufacturing Systems Solutions) suite. The vManage solution is used by leading electronics manufacturers as the single platform which collects accurate real-time machine performance data from all major equipment vendors and provides complete visibility and control over every aspect of the manufacturing operation, from SMT lines to final system assembly.

"This partnership has been extremely beneficial to both companies and we are delighted that it has now resulted in an exclusive agreement with Magneti Marelli," said Stephan Häfele, President of the Valor Europe division of Mentor Graphics. "vManage enables Magneti Marelli to comply with the special requirements for the automotive industry, and I am certain that it will continue to be a valuable software solution by helping them to remain competitive."


For more information, please contact:

Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com

Suzanne Graham
Mentor Graphics
503.685.7789
suzanne_graham@mentor.com


Source: Marketwire (July 13, 2010 - 9:00 AM EDT)

News by QuoteMedia
www.quotemedia.com  

Mentor Graphics Announces 22nd Annual PCB Technology Leadership Awards Program

WILSONVILLE, OR, Jul. 15, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 07/15/10 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced the call-for-entries of its 22nd annual Technology Leadership Awards competition, continuing its tradition of recognizing excellence in printed circuit board (PCB) design. Started in 1988, this program is the longest running competition of its kind in the electronic design automation (EDA) industry. It recognizes engineers and computer aided design (CAD) designers who use Mentor's innovative technology to address today's complex PCB systems design challenges and produce industry-leading products.

Prominent experts in the PCB industry will judge the contest, including: Happy Holden, vice president and chief technical officer, Foxconn Advanced Technology Group; Gary Ferrari, technical support director, FTG Circuits; Pete Waddell, president of UP Media, publisher of Printed Circuit Design & Fab/Circuits Assembly Magazine; Andy Kowalewski, senior interconnect designer, AdvantagePCB; and Rick Hartley, senior principal engineer, L-3 Communications, Avionics Systems, Inc.

"I'm pleased to see Mentor's continued support for this program," stated Happy Holden, vice president and chief technical officer, Foxconn. "PCB designers are constantly facing new challenges and finding innovative solutions to address them. The Technology Leadership Awards are a great way to showcase the leading-edge design approaches they're utilizing, and recognize the designers and their contribution to the PCB industry."

This year, entrants will be able to submit their design accomplishments in any of six categories representing a wide variety of industries:

   * Consumer electronics and handheld
   * Industrial control, instrumentation, security and medical
   * Military and aerospace
   * Computers, blade and servers, memory systems
   * Telecom, network controllers, line cards
   * Transportation and automotive

"Mentor Graphics is committed to the PCB systems design community, and our PCB Technology Leadership Awards contest provides the opportunity to showcase the most innovative and talented designers worldwide," said Dan Boncella, director of marketing, Systems Design Division, Mentor Graphics. "The program continues to attract the most skilled users of our PCB systems design tools and Mentor expects this year's competition to be bigger than ever, with entries from virtually all the major electronics countries in the world."

Winners will be named for each category as well as a Best Overall Design recipient. The timeframe for submitting entries is from July 15 - September 24, 2010. Entrants can apply online at www.mentor.com/go/tla. This web page also has a video from the judges with helpful hints on how to win.

About the Technology Leadership Awards Contest
Mentor's Technology Leadership Award contest is open to any designs created with Mentor's PCB solutions, including the Board Station®, Expedition® Enterprise and PADS® design flows. Judging will be based on overcoming complexity challenges, such as small form factor, high-speed content, design team collaboration, advanced PCB fabrication technologies, and design-cycle time reduction. Judging will start September 24 and winners will be announced November 9 on a worldwide web broadcast.


Source: Marketwire (July 15, 2010 - 9:00 AM EDT)

News by QuoteMedia
www.quotemedia.com  

wen´s interessiert:
(Perf.stimmt ja!)

Mentor Graphics Collaboration With National Instruments Speeds Time to Market With Faster Test Bench Development ; ;

WILSONVILLE, OR, Jul. 26, 2010 (Marketwire) --

WILSONVILLE, OR -- (Marketwire) -- 07/26/10 -- Mentor Graphics Corporation (NASDAQ: MENT) today announced that collaborative efforts with National Instruments have resulted in a solution that provides test-oriented feedback to design teams at every step of the design process. The new SystemVision™ SVX Client environment for the NI LabVIEW software allows designers to develop their test bench against a virtual prototype based upon their specification, and then use the exact same test bench in the NI LabVIEW software on physical prototypes. This process allows test bench development to be done in parallel with system development and prototyping, speeding time to market and time to certification.

The combined power of the SystemVision SVX multi-discipline collaboration environment with the NI LabVIEW software, the industry's leading graphical system design software, allows test program development to proceed without waiting for physical prototypes. With this solution, test program developers can not only deliver ready-to-go product tests, they can also provide test-oriented feedback to the design teams. The SystemVision SVX environment provides a virtual prototyping of the entire system, while the LabVIEW software implements test program development and execution.

"Unlike the traditional design, simulation, and test sequential process, the combination of SystemVision SVX with LabVIEW provides for continuous product test program development much earlier in the development cycle, which provides a traceability that is particularly appealing in businesses with high levels of required certification," said John Pasquarette, vice president of Software Product Marketing at National Instruments. "We are pleased that a case study of this approach will be presented by a major implantable medical electronics company at the upcoming NIWeek 2010 graphical system design conference."

The SystemVision SVX environment is a virtual execution environment that connects otherwise isolated, domain-specific modeling and software tools dynamically -- at any phase of the design process -- over a secure, managed signal channel. Its client-server architecture provides for precise, distributed, time-synchronized interfaces between signal generators and consumers, which are easily placed, as symbols, in graphical tools. In addition, a C/C++ Application Programming Interface (API) makes it easy for application embedded software to interact with models of control systems, multi-physics subsystems, sensors and actuators, and analog and digital electronics.

"The SystemVision SVX environment allows designers to create a precise virtual prototype based upon the product's specifications," said Serge Leef, vice president, System-Level Engineering Division, Mentor Graphics. "This allows the test bench to be developed simultaneously with product development, providing earlier test feedback into the design process, and greatly shortening design cycles by making development and test parallel rather than serial. The result is significantly faster time to market and time to certification."

About National Instruments
National Instruments (www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with no one customer representing more than 3 percent of revenue and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has more than 5,000 employees and direct operations in more than 40 countries. For the past 11 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America.

For more information about NIWeek visit www.ni.com/niweek.

(Mentor Graphics is a registered trademark and SystemVision is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
James Price
Mentor Graphics
503.685.1778
james_price@mentor.com

Suzanne Graham
Mentor Graphics
503.685.7789
suzanne_graham@mentor.com


Source: Marketwire (July 26, 2010 - 9:01 AM EDT)

News by QuoteMedia
www.quotemedia.com  

Ich warte auf den Ausbruch nach oben, wenn hier nicht bald etwas passiert, liest das keiner mehr.
Nichts für ungut, du kannst ja nichts dafür!
gruß urbommel  

ist momentan,finde ich ,ganz o.k. im Vergleich zum Gesamtmarkt.
Wenn man den Thread nicht  ab und an hoch holt,liests wahrscheinlich überhaupt  keiner mehr.
Gruß,Heiko


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
"Der Herr hat´s gegeben-die Börse hat´s genommen."
Heiko Thieme  

wenn das so weiter geht?
Villeicht sollten wir schon viel früher mal fluchen!
gruß urbommel  

gibt schlechtere ;-)  

vielleicht sehen wir unsere Kohle doch wieder?
Vielleicht auch mit Gewinn?
Wer weiß?
Schön dich wieder an Bord zu wissen
gruß urbommel  

ganz still und leise!
Vom Tag der Übernahme bis heute ca. 48 %, darüber redet keiner?
gruß urbommel  

Quartalsfinanzbericht Erscheinungstermine (Original)
         •§Q4 2011 - 3. März 2011
         •§Q1 2012 - 26. Mai 2011
         •§Q2, 2012 - 12 August 2011
         •§Q3 2012 - 17 November 2011
         •§Q4 2012 - 1. März 2012

Meine Korrektur:
         •§Q4 2010 - 3. März 2011
         •§Q1 2011 - 26. Mai 2011
         •§Q2, 2011 - 12 August 2011
         •§Q3 2011 - 17 November 2011
         •§Q4 2011 - 1. März 2012

Der Fehler spricht nicht für das IT-Unternehmen!!!!
Gruß urbommel  

man hat das gedauert, die 10, endlich zweistellig auch in Euro.
Hoffentlich ist das der Durchbruch in Euroland, Mentor ist eine Perle und nach Aussage vom DAF sollen die Tec-Werte erst noch abgehen.
Wenn noch gute Zahlen für 2010 kommen, geht der Wert durch die Decke!
Hat schon mal jemand etwas von Dividende gehört oder gelesen?
gruß urbommel  

der Kurs entspricht genau der Marktkapitalisierung, jedweder Zuwachs wäre dann Kursphantasie.
Jetzt müssen im März gute Zahlen her, sonst war's das!
gruß urbommel  

• Q4 2010 - 4. März 2011
 HV vorgeschlagen zum 12. Mai 2011
        • Q1 2011 - 28. Mai 2011
        • Q2 2011 - 19. August 2011
        • Q3 2011 - 19. November 2011
        • Q4 2011 - 02. Dezember 2011

Bardividende gab es noch nie!
Vielleicht gibt es Aktien oder Bezugsrechte oder auch gar nichts?

gruß urbommel